Rotary tube furnaces
HTM only produces customized rotary tube furnaces according to customer requirements, with a wide range of versions for:
- chemical reactions;
- calcination processes;
- production and hardening of granules;
| Material of the rotary tubes | Quartz, Al2O3 ceramics, stainless steel, inconel | | Diameter of the rotary tube | 40 to 220 mm | | Length of the rotary tube | 500 to 2000 mm | | Temperatures | up to 1600 °C | | Heating unit | All tube furnaces (incl. split tube) produced by HTM | | Number of heating zones | 1 to 10 zones | | Rotation speed | 4 to 200 rpm,
dependent on the sealing material with a closed furnace | | Material flow | continuous / discontinuous (batch operation) | | Supply media | Process gases, water vapor, vacuum, exhaust gas, hydrogen post-combustion | | Control units | HTM's control units,
integrated motor drive control, control of media flows (if any) |
Zum Seitenanfang
Examples
Laboratory Rotary Tube Furnace up to 900 °C
(Operation manual (German) Rotary tube furnaces for continuous material flow AU08-0-171)
- Toothed belt drive;
- Working tube made of inconel or stainless steel;
- Vacuum tight;
- By inclining the entire apparatus, the material is placed in the furnace;
- Control with process controller PMA KS98-1.
Zum Seitenanfang
Rotary tube furnace with working tube open on both sides, up to 1600 °C
- Chain drive
- inclination: to 8 °;
- Quartz working tube(continuous operation > 900 °C).
Zum Seitenanfang
Rotary tube furnace up to 1150 °C
(Operation Manual (German) Rotary tube furnaces with process gases AU06-0-087)
- Toothed belt drive;
- Container for the material to be heated;
- Two process gases;
- Heated Teflon-sealed rotary feedthrough;
- Control unit with process controller PMA KS98-1
.
Zum Seitenanfang
Laboratory rotary tube furnace for continuous operation up to 1100 °C
(Operation Manual (German) Rotary tube furnaces with dosing conveyor AU08-0-017)
- Laboratory split tube furnace up to 1100 °C,
with 3 separately controllable heating zones; - Dosing conveyor for feeding of semolina-like material;
- By inclining the complete equipment, the material is conveyed in the furnace;
- Water-cooled rotary feedthroughs on both sides;
- Connection of vacuum / protective gas possible;
- Control with three OMRON E5CK temperature controllers and transformers, integrated in a MinTec rack;
Zum Seitenanfang
|
|
|
